The Shoemaking Technology You Have To Know.

< p > < strong > scale: < /strong > /p >

< p > understanding scale (SIZE) should first understand the following prerequisites: < /p >

< p > A. the length system of countries (regions): < /p >

< p > 1. Britain and the United States: the British system is made of 12 British English and 8 salted English each time, commonly known as 8 points, the British and American 1/8 inch (no "score"), the length of each English is 25.4 centimeters (metric system) or 25.4m/m, each 1/8 is about 3.15 m/m, each 3/8 is about 8.46 m/m.

< /p >

< p > law, Japan - using the metric system (< a target= "_blank" href= "//www.sjfzxm.com/" > shoes < /a > less than one meter), so it can be called the "centimeter" system, which is 100 centimeters per meter, divided into 1O 1O per centimeter, 1m/m per case, O.5 5 cm, and O.5 6.66 centimeters.

< /p >

< p > Taiwan: Shanghai ruler system (less than one foot length of shoes, also known as Shanghai inch), each Shanghai inch is about 1.16 inches, about 3.5cm (each Shanghai size is 10 Shanghai points, each Shanghai is about 3.52 m/m).

< /p >

< p > B. countries (regions) scale gap: < /p >

< p > 1. Britain and America: the difference between the number and the number is 1/3? About 8.46 m/m, which applies to men's, women's, children's shoes, sandals or low price shoes.

And so on, in addition to the above gap, there is still half a gap, the difference between the level of 1/6, about 4.23 m/m, applicable to men and women full of shoes or market demand for more stringent prices of high priced shoes.

< /p >

< p > France: the difference between the number and the number is 2/3 cm about 6.66 m/m, which covers men's, women's and children's shoes.

And so on, full of shoes, bandages or non strap, drag sandals...

And so on, there are few high-grade shoes with half grade.

< /p >

< p > 3: the difference between Japan: No. and number is l cm, 10m/m, suitable for men, women, children's shoes sandals or low cost shoes (such as canvas shoes).

And so on, or market consumption is more picky consumers.

And so on. Apart from the above gap, there is a gap between half and half. The grade difference is 1/2 centimeter about 5 m/m, which is suitable for men, women, full shoes or high priced shoes with relatively strict market demand. < /p >

< p > Taiwan: the gap between the number and number of the Shanghai is 1, the Shanghai is about 3.52 m/m, the applicable range of men's, women's, children's shoes, sandals or full shoes; the difference between children's shoes and students' shoes can be relaxed, and the gap between two grades is a gap (jumper production and sales), so the gap between children's shoes and students' shoes is 2, and the score of Shanghai is about 7m/m.

< /p >

< p > < strong > shoe last scale < /strong > /p >

< p > shoe last scale, in the same stage, the relationship between each code (scale code) must be a grade difference; for example, the American Style Men's shoes are suitable for young people to wear styles at the first stage. They are composed of #7 numbers to #12 numbers. Among them, the difference between the length and width of the #7 peace pition 8 or other related positions is the same as that of the relevant position scales of #8 and #9 or #9 and #10. Therefore, the concept of "grade difference" can be used as a measure of the accuracy of the shoe last stage.

< /p >

"P", the same pair of foot wear factors and production factors have derived a variety of different needs of shoe and shoe last, such as shoe last, shoe last, shoe last, shoe last, shoe last, California shoe last.

And so on.

< /p >

＜p＞　　＜a href="//www.sjfzxm.com/news/index_x.asp"＞凉鞋＜/a＞楦之三围和满帮鞋之三围不同，主要为穿着因素：满帮鞋因包脚趾(TOE BOX)，所以可有较肥大之脚趾空间(鞋楦头部较大)：凉鞋因露趾(OPEN/OE)，所以需有较吻合脚趾的空间(鞋楦头部较接近趾形);凉鞋亦须有较不影响带条定位的穿著空间，因此通常腰围比满帮鞋粗：以一般英美尺度趾围等级差1/4而言，满帮鞋三围依序为腰围减一级，背围加二级，例如趾围为8?，则腰围为73/4?，背围为;81/2?：换算为凉鞋则为腰围加一级，背围加二级，例如凉鞋趾围为8?，则腰围为81/4?，背围为81/2?。

< /p >

＜p＞　　鞋楦担负第一线任务鞋楦只是制鞋的媒介，它并非消费品，它担任的是让制鞋者藉以完成的一小部份，而非全部，如果把鞋楦看成是制鞋的全部而予充分信赖，忽略了绝大部份的制鞋工作时，就错了，当然鞋楦对于制鞋来说非常重要，但是其它工作何尝不重要!“鞋楦”能够在制鞋业里被塑造成第一线的任务罢了：万事起头难，在每一项技术性组配工作步骤，通常会给予工作者深刻的印象!它所能赐给工作者的创痛也是最为尖锐;鞋楦在制鞋过程里的角色和地位，正好足以让你的制鞋工作.因为开头的错误而全部泡汤!鞋子的实用与否，不是依赖鞋楦就能解决的，它应该和鞋子的容积空间(鞋材及组合)及一双活动的脚(穿着)，加上足供观赏的外表…

The relationship between these four entities can not be separated from each other independently. < /p >

< p > < strong > the shoe last is less than /strong > /p >

< p > shoes are products that are worn on feet and parallel to the ground. Therefore, a pair of shoes is a good match. First of all, the shoes and the ground are in the same position. The shoes and the ground are in the sole position, and the lines displayed on the sides are called "side lines". The right side shoes should have the right side line, and the right side line is called the standard side line.

< /p >

< p > the standard side line is formed by three parts: first, the last point is warped, two, the location, the three, the heel height (the name of the shoe last) or the heel.

< /p >

< p > 1, the last tip of the warp: when the shoes are placed on the ground (desktop), the last tip must have an upturned shape. The angle of its upwarping should be A. thick, B. shoe material soft and hard, C. used for wear, D. matched with high and low, and some changes should be made. The last shoe of the general shoe is about 8m/m 12m/m, for example, the thickness of the shoe last shoe should be increased.

Thin bottom shoes are easy to wear after turning, the last point can be lowered, and the shoes of hard shoes are not easy to walk. It is necessary to increase the last point of the shoe with a large movement. For example, the last edge of a sport shoe can be increased. The heel shoes must have shoes with a large angle and a large angle.

< /p >

< p > two, location: the location of the side line of the shoe is located at the place where the toe length is about 2/3, and the width of the ground is about 8m/m 12m/m.

< /p >

< p > three, heel suspension height (or heel): there are many kinds of heel shape and size, but the heel must be laid flat on the ground, while the shoes are flat on the ground, except for the location, the rest is flat with the surface and the ground.

The above three are all up to standard, and you can get the shoes that are comfortable to wear.

< /p >

< p > measuring shoe last, mostly for measuring the length, width and circumference of the periphery of the last table, the best tool for measuring the salted tape with unretractable material is the best. The narrower salted tape ruler is the best. The outer radian of the shoe last is measured, and the use of the ruler (Qu Xianchi) is used. But the application of the ruler is only limited to measuring the symmetry of the arc of the left and right feet.

< /p >

< p > > a href= "//www.sjfzxm.com/news/index_x.asp" > women's shoes < /a > last. The ratio of the middle to the bottom is about 9:3:3:2, that is, the foot length is 9, the width of the sole is 3, the distance from the toe to the ground is about 3, and the heel width (about 1/4) is about 2?

Japanese yardstick is based on the centimeter length of the foot as the shoe number. As for the different styles, the production factories should give up their own professional knowledge. For example, if the feet are 24.2 centimeters long, they should wear a shoe number of #24.5 and a foot length of 26 centimeters. The shoe number should be #26.0 (0 after the decimal point must be marked, the half number must be marked O.5, and the 1/2 should not be marked as the US / British scale): the Japanese scale is limited to Japan, and the rest area is not used.

< /p >

＜p＞　　当我们打赤脚行走时候，脚趾围转折比较灵活，当我们跑步的时候’脚趾围的角度必须加大;但当我们穿鞋走路的时候，局限在鞋子里的趾围，转折就会受到鞋子的限制，按照行动的需求，鞋子就必须依照用途及结构性予以设定适当的鞋尖翘度，因此制鞋的时候为了适应穿鞋走路，使穿鞋行走不致影响因脚趾被鞋子包围，因而转折不灵活所造成的不便(脚趾围转折不如意会造成行走困难，上阶梯困难或脚尖踢到地上物而摔倒受伤)，必须让鞋尖和地面在静止状态时保持距离，这种因穿着而设计的鞋类和地面距离，我们称它为“楦尖翘度”(TOESPRING);用较厚或较硬的鞋底作成的鞋子，就应将楦尖翘度角度加大，用以抵销因趾围转折不易所造成的鞋着行走障碍，反之用较薄或较软的鞋底作成的鞋子，就可将楦尖翘度降低或贴地：穿着高跟鞋及跟越高的鞋子，因为已

By making the feet of high heeled shoes bend to the extreme, in order to give back a bit of comfortable clothes, they can also reduce the last point's warping.

< /p >